What is your Mining Hash rate?


GTX 1070 , about 566 MH/s
Using ccminer KlausT v.8.13


1070 should be ~710MH/s… just change intensity higher… with sgminer-gm 5.5.5 the intensity should be around 12… ccminer if im not wrong about 27…


I set it to 27 restarted pc and now gets about 661 MH/s
Running W7.

Ofcourse more tweaking could be done or using certain Cuda drivers but this seems fine for me.

Thanks for the advice.

Is there a better miner ? I have not tried sgminer/tpruvot ccminer/alexis78 ccminer yet.

Happy mining all!


I personally prefer sgminer-gm 5.5.5 version… but many people seems to have problem using sgminer with their nvidia… you can try if you want…


1080 I’m getting ~950 using ccminer


I’m solo mining with three cards at about 2.3 gh/s using cgminer.


How often are you seeing a block? @Y2katy


On a good day I’ll get 2-3. I have gone 24hrs without getting one before.


750 ti …ccminer-x64-2.2.1-cuda9rc… dont laugh… 130 mh/s. i have gotten 3 blocks… total. i can usually pull with your guys help about 10coin a day. but i think i figured out a trick…i havent done it just yet with SMART… at least i dont think so… but last night i loaded 2 instances of it of it running on ZUR…i did gain about 50% more coin running 2 instances at a slightly lower h/s… but gaining more shares… because of the 2 miners


Let me try it if you can tell me what Zur is and i will have a run and report the hashrate here.
I will try the miner you mentioned also.


ZUR coin, on zpool


With Zotac 1060 6Gb I’m getting about 430Mh/s using ccMiner release 8.11(KlausT-mod). I would like to make a rig with 3 or 4 rx580, any experience with this cards for this coin?


I am using 3 EVGA GeForce GTX 1080 Ti FTW3 GAMING 11GB GDDR5X and reach 3860Mh/s using ccminer-811-x64


I’m looking at putting together a mining rig with four gtx1050s, any idea what my hash rate with Smartcash will be around?


My guess would be around 1.5GH/s


So from what I gather:

1080 ti - 1286
1080 - 950
1070 ti - ?
1070 - 710
1060 6gb - 430
980 ti - 860

I see smartcash doesn’t utilize memory core at all, so wouldn’t a 1060 3gb pull 430 as well?


I’m curious as to what the 1070 ti will do for hashrates. I would think it would do better then the 1080 but then again I’m wrong a lot lol.


With nVidia GTX 1060 6GB and a little performance tunning (core clock +200, power limit = 120W) I get 430 MH/s (as stated by other users) on the ccminer, but at the pool statistics my average hashraste is reported as 195-200 MH/s. Which of the two is the actual one?

Also, are 2GB card capable of mining Smartcash? I have an old nvidia 640 and I am curious if that could get any chance…!


im mining with a single saphire hd4770 at 56 MH\s with sgminer


Video Card: Geforce GTX 1080 TI (Founders Edition)
Stock speed: 1250-1275 MH/s
Overclocked: 1400-1410 MH/s (Core: 200mhz+)

Updated 2017-12-16